tr

TRIO-PAS RUST REMOVER


TRIO-PAS, iron and steel surfaces to remove rust and rust stains by forming a bright surface is a mixture of acid concentrate product. Worn surfaces of 50% should be clean with TRIO-PAS solution. Dirty little worn and stained surfaces, copper and brass in the decision-50 TRIO-20% PAS solution should be applied 15-30 minutes and the surface should be washed with water. 10% Aluminum-TRIO-PAS solution 25'lik max. 5 minutes should be applied 15-30 minutes and should be washed with surface water. In ceramic tiles, enamel surfaces, porcelain-40 TRIO-PAS 20% solution should be applied 15-30 minutes and the surface should be washed with water. Stainless steel and epoxy coated tanks which light rust,% 5-TRIO-PAS solution with a 15 to be cleaned.


TYPICAL PHYSICAL PROPERTIES:

Appearance : red-colored liquid
Resolution : completely soluble in water
Specific gravity : 1.17-1.22 gr/cm3
pH (1% solution) : 1.0
Alma Flame Temperature : None
Explosion Limit : None


CHEMICAL PACKAGING AND STORAGE OF MATTER:
Packaging shape, 25-30 Kg. in sealed plastic bins and storage lık period is 2 years.


WORKING CONDITIONS SHOULD CONSIDER of the ISSUES:
R-34 can cause burns.
S-45 In case of accident or you do not feel good, seek medical advice immediately.
S-26 In case of contact with eyes, rinse with plenty of water and seek medical advice immediately.
S-27 This is contaminated clothing should be removed immediately.
S-36 / 37 employees when appropriate protective clothing, protective gloves.
S-39 employees when the appropriate protective eye / face use.
S-62 Do not induce vomiting if swallowed victim. Immediately refer to the first aid service, show the label.

Announcements





Pool