tr

TRIOSIT SEA WATER COOLING SYSTEM MICROORGANISMS PREVENTER


TRIOSIT, cooling system, help to prevent pollution in the microbiological and makrobiyolojik to be used is the product in liquid form. Bacteria, algae, clams, mussels, mushrooms, by preventing the formation of mold and microbiological corrosion by eliminating the possibility to act as a corrosion inhibitor. Thus, heat transfer takes place in a healthy way. Coastal waters and open sea passage every 2 days in the middle of the course at least once every 7 days for an hour dosing pump into the system with the help of 10 ppm (mg / l = grams / ton) TRIOSIT should be implemented. 100 tons per hour every 10 ppm to catch one and a half hours for the water flow rate exceeding 1.5 Kg. TRIOSIT should be applied. The most ideal dosing point TRIOSIT contribution kinistin filter is then.


TYPICAL PHYSICAL PROPERTIES:

Appearance : Clear light brown liquid
Resolution : completely soluble in water
Specific gravity : 1.10-1.20 gr/cm3
pH (1% solution) : 9.0-10.0
Alma Flame Temperature : None
Explosion Limit : None

CHEMICAL PACKAGING AND STORAGE OF MATTER:
Packaging shape, 25-30 - Kg. in sealed plastic bins and storage lık period is 2 years.


WORKING CONDITIONS SHOULD CONSIDER of the ISSUES:
R-21 Harmful in contact with skin.
R-22 Harmful if swallowed.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-28 in contact with skin, wash immediately with plenty of water.
S-36/37 suitable protective clothing while you work, use protective gloves.
S-39 employees when the appropriate protective eye / face use.
S-62 Do not induce vomiting if swallowed victim. Immediately refer to the first aid service, show the label


Announcements





Pool